Southeastern Equipment Corporation (North Carolina) Machines

1997 John Deere 750C LGP
$17,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Open canopy, all hydraulic 6-way blade wide pads. Pins, bushings & sprockets need to be replaced on the undercarriage soon. Starts easy, burns clean exhaust, steers properly, pushed strong. No known i...
Serial Number: CEG-826025
Stock Number: 03-8754

1987 Caterpillar D6H
$29,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Open canopy, angle blade with twin hydraulic tilt and full root rake. The pre-emission (NO DEF) diesel engine starts easily and burns clean after 60 seconds of warmup.. 24” wide pads on a 40% remain...
Serial Number: CEG-4RC01396
Stock Number: 03-9079

2006 John Deere 700J LGP
$49,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Enclosed cab with heat and cold air conditioning, all hydraulic 6-way blade, NEW rails and sprockets (NOT PICTURED). Good running machine with no major leaks, no major sheet metal damage. No known iss...
Serial Number: CEG-T0700JX135981
Stock Number: 03-9245

2011 Case 650L
$52,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Open canopy, all hydraulic 6-way blade, limb risers, extended wear rotating bushings undercarriage with very good life remaining with 20” pads. Joystick controls. Clean, straight, tight machine. Cle...
Serial Number: CEG-NBDC60009
Stock Number: 03-9266

2014 Caterpillar D5K2 LGP
$52,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Enclosed cab with heat and air conditioning, all hydraulic 6-way blade, wide pads. Plumbed for Trimble GPS. Inside cab is clean with all controls functioning properly. Well maintained dozer in good re...
Serial Number: CEG-KYY01020
Stock Number: CEG-03-8704

2013 John Deere 650K LGP
$54,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Enclosed cab with heat and air conditioning, 102” wide 6-way blade. Good undercarriage remaining. Original factory paint with no damage. Starts easily, tight blade. No known issues....
Serial Number: CEG-1T0650KXJDE242575
Stock Number: 03-9137

2006 John Deere 750J LGP
$59,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Enclosed cab with heat and cold air conditioning, all hydraulic 6-way blade. 80% plus undercarriage remaining. Tight blade, no leaks, original factory paint with no damage. One owner, well maintained ...
Serial Number: CEG-T0750JX130946
Stock Number: 03-9244

2016 Caterpillar D5K2 LGP
$79,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Enclosed cab with heat and cold air conditioning. 26” wide pads on a 60% + remaining System One undercarriage. The engine starts easily and burns clean exhaust. Tight blade with good moldboard. Limb...
Serial Number: CEG-CAT00D5KCKY202409
Stock Number: 03-9090

2014 Caterpillar D6K2 LGP
$79,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Cat D6K2 LGP Dozer with like new CAT undercarriage, 6 way blade that is tight with a good cutting edge and no leaks showing, Trimble GPS ready, Cat C6.6 starts easy and burns clean, cabins is clean wi...
Serial Number: CEG-CAT00D6KLRST00937
Stock Number: 03-9091

2015 Caterpillar D6K2 LGP
$79,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Enclosed cab with heat and cold air conditioning, all hydraulic 6-way blade, 30” wide pads on a 60% remaining undercarriage, limb risers, side and rear screens. Original factory paint with no damage...
Serial Number: CEG-CAT00D6KTJTR00362
Stock Number: 03-9092

2016 Caterpillar D6K2 LGP
$79,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Cat D6K2 LGP with enclosed cab with heat and A/C, Trimble GPS ready straight sheet metal ,heated joysticks, Root Rake, Limb Risers, side and rear screens, 65% plus undercarriage, ripper valve, good cu...
Serial Number: CEG-JTR00333
Stock Number: 03-9185

2016 Caterpillar D5K2 LGP
$84,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Very Nice Cat D5K2 LGP with low hours, heat and A/C, Tinted windows, screens, LIKE NEW 90% plus system one undercarriage with stickers still on the pads, Clean machine with no noticeable leaks or repa...
Serial Number: CEG-KY202480
Stock Number: 03-9088

2015 Komatsu D37PX-23
$89,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Enclosed cab with heat and air conditioning, very tight 122” wide all hydraulic 6-way blade. 24” wide pads on a 80% remaining undercarriage. Inside cab is clean with all controls functioning prope...
Serial Number: CEG-KMT0D121H01080059
Stock Number: 03-8880

2016 Caterpillar D6T LGP
$109,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Enclosed cab with heat and cold air conditioning, all hydraulic 6-way blade, Cab protection, rear tank protection, sweeps and screens. Original factory paint with no major damage. Starts easily and bu...
Serial Number: CEG-CAT00D6TERAD01025
Stock Number: 03-9221

2019 Caterpillar D6 LGP
$119,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Cat D6N LGP with 6-way blade, Grade control, GPS ready, will include a complete new undercarriage (not shown in current pictures). very straight sheet metal, cold a/c, tight blade and steering cylinde...
Serial Number: CEG-CAT00D6NPSGG00460
Stock Number: 03-9030

2009 Caterpillar D8T
$219,000.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Very nice Cat D8T with Pre Emissions Cat Engine that starts easy and burns clean, Like New Undercarriage, 4 Barrel single shank ripper, enclosed cab with heat and a/c, blade with tilt and new cutting ...
Serial Number: CEG-KPZ03332
Stock Number: 03-9182

Okada CUT100HR
$29,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Rotating multi processor with good cutting jaws and piercing tips . Cylinder force of 189 US tons. Carrier weight of 30-50 US tons...
Serial Number: CEG-CRIC030N
Stock Number: CEG-07-8059

1994 Hydro-Ax 611E
$19,500.00
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
☎ Click for Phone Number
Rubber tired Feller Buncher with Disc saw, articulating center. Screens and sweeps. Glass has been replaced with Plexiglas and needs to be replaced again. (It’s cloudy) Starts easily, runs and opera...
Serial Number: CEG-5053
Stock Number: 07-9253

Dealer Information:
Southeastern Equipment Corporation (North Carolina)
South Mills, NC
Bryan Smith
☎ Click for Phone Number